Electric Motor Manufacturing
The laser welding technology of flat wire motors is mainly applied to winding forms such as Hairpin, X-pin, and Umini pin. Among them, X-pin technology has put forward higher requirements for welding processes after eliminating straight segments, including higher efficiency and lower heat input.
Advantages of GW Laser in Electric Motor Manufacturing

High Reflectivity
At room temperature, solid purple copper has a low absorption rate for the wavelength of fiber lasers (1080nm). However, when a keyhole is formed on the surface of purple copper, the absorption rate can rise to more than 60%. The high-brightness laser technology from GW Laser (*****14μm core diameter) can break through the energy density threshold required to form a molten pool on the surface of purple copper in sub-millisecond levels.
Paint Protection
During the welding process, it is necessary to prevent the laser from burning the paint. Especially in X-pin welding, where the length of bare copper is short, precise control of energy is required during welding. The laser from GW Laser responds quickly and has high control accuracy, enabling precise energy control and meeting the welding process requirements.
Welding Quality
In the welding of flat copper wire, there are high requirements for porosity and welding quality. The FRM with a core diameter ratio (14/100, center/ring) can ensure high brightness of the central beam to achieve high energy density, while further stabilizing the molten pool through the ring beam to reduce welding defects such as porosity and spatter.
Visual Positioning
Accurate positioning and optimization of the welding path are achieved through the vision system, ensuring welding quality.
Application of GW Laser in the Field of Electric Motor Manufacturing
Copper, as the main material of electric drive motor systems, due to its material factors such as absorbance and thermal conductivity, tends to produce a large amount of spatter and pores during processing. The FRM product from GW Laser can effectively correct the shape of the keyhole, maintain its stability, and improve the welding quality and efficiency of flat copper wires.

0